Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Spring Repair Across Sunset
If you live in Sunset, you already know the sound: a loud bang from the attached garage, and suddenly the door won’t lift. A snapped torsion spring is the most common reason a garage door stops working here, and it almost always happens on the original builder-grade steel door that came with your ranch or townhome. We fix broken springs across Sunset every day. The price is quoted and agreed before any work starts, and our technicians have up to 10 years of experience with exactly the doors and openers installed in this part of Miami-Dade. Call (844) 484-9800. We answer 24/7.
Why Sunset Homeowners Call Kendall Garage Door Repair Co for Garage Door Spring Repair
Sunset is a built-out, unincorporated Kendall-area suburb, and the homes here are overwhelmingly 1960s-1990s concrete-block ranches and low-rise townhomes with attached garages. That means garage door work in Sunset is nearly all repair and replacement on aging 16′ and 9′ steel doors, not new construction or commercial jobs. We focus 100% on residential garage doors, so we’re not splitting our attention between springs and unrelated home repairs. We already know your LiftMaster or Chamberlain opener, and we know how these particular doors were built and how they fail.
What we bring to Sunset specifically is hurricane-code fluency. Post-Andrew Miami-Dade product approval and wind-load rules mean your door needs Florida Product Approval-rated components and reinforced tracks and bracing. A generic installer or handyman who doesn’t work here regularly will miss that. When a spring swap touches tracks, end bearing plates, or drums, we make sure what goes back in matches what the door was approved with, so you’re not stuck at permit close-out. Our technicians are state-licensed and insured as their state requires, and we stand behind the work.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Spring Repair Services in Sunset
Spring work is high-tension and genuinely dangerous. The springs on a residential door hold hundreds of pounds of force, and a wrong move with a winding bar can cause serious injury. That’s why we handle it with trained, safety-conscious technicians rather than treating it like a quick DIY fix. Here’s what we do across Sunset.
Torsion Spring Replacement
The torsion spring sits on the shaft above the door and does most of the lifting. When one snaps on a 16′ or 9′ builder-grade steel door, we replace it with a correct-cycle unit matched to the door’s weight and your daily use. We also check the drums, cables, and end bearing plates that were originally sized for a lower-cycle spring, because those parts carry their share of the load.

Extension Spring Replacement
Older Sunset townhomes sometimes still have extension springs running along the tracks. We replace them in matched pairs and fit the safety cables that keep a broken spring from flying loose. If your door has the original hardware from the 1970s or 80s, we’ll tell you plainly what’s safe to keep and what needs to go.

Broken Spring Repair
When a spring fails, the full weight of the door – often 150 to 350 pounds – starts riding on the opener rail. That’s how a LiftMaster or Chamberlain opener ends up straining or burning out right after the spring breaks. We remove the broken spring, replace it, and check the opener for damage before it costs you a second repair.

Spring Adjustment
Sometimes the spring hasn’t snapped, but the door is out of balance, heavy to lift, or drifting down on its own. We measure the door’s balance and adjust tension so the opener isn’t fighting an out-of-whack door. This is also the moment we check roller condition and track alignment, since rust and drag throw the spring out of balance.
Trusted Brands We Service in Sunset
We’re factory-familiar with 8 of the most widely installed residential garage door and opener brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. In Sunset, that range matters, because you’ll find all of them on the same street. We arrive already knowing your system, whether it’s a newer smart-integrated LiftMaster or an older Genie that’s been running since the 1990s. We don’t need to figure out your equipment on the job. We already know it.
Common Garage Door Spring Repair Problems We See in Sunset Homes
Because Sunset is built out of 1960s-1990s concrete-block ranches in unincorporated Miami-Dade, spring repairs here almost always land on original builder-grade 16′ or 9′ steel sectional doors. The opener rail, drums, and end bearing plates were never sized for a high-cycle spring. So a “spring swap” in Sunset is really a balance-and-hardware check tied to Miami-Dade product approval for permit close-out. The salt-laden humidity along the bottom weather seal rusts panels and seizes rollers, which loads the spring unevenly and shortens its cycles well before the rated life. Here’s what that looks like on the ground:
- Snapped builder-grade torsion springs. Original 16′ or 9′ steel springs snap after years of salt-laden humidity and rust creeping up from the bottom weather seal. The spring itself may be rated for a certain number of cycles, but the rust and drag push it past that earlier than expected.
- Openers straining on a broken spring. When the spring goes, the full 150 to 350 pound door weight rides on the opener rail. A LiftMaster, Chamberlain, or Genie opener that was fine yesterday will start overheating or failing because it’s now lifting the whole door.
- Post-storm track and panel binding. After a summer storm, a door whose reinforcement and spring were never matched to Miami-Dade wind-load requirements can end up with misaligned tracks and binding panels. That drag then wears the spring faster.
- Seized rollers and hinges. Sub-tropical humidity year round seizes rollers and hinges along the bottom of the door. That extra friction throws off the balance and loads the spring unevenly, so the door feels heavy even when the spring is technically intact.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Spring Repair in Sunset, FL
Spring repair in Sunset typically runs $180 – $340 for one spring. A matched pair is usually replaced together, so a pair costs about twice that. These are estimates for the Sunset market; the written estimate sets the final price. Here’s how the line items usually break down:
| Service | Typical Estimated Range |
|---|---|
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
What affects the number on your door: the spring type and cycle rating, whether one or both springs go, and whether cables, drums, or bearing plates need replacing. Old builder-grade doors that were never sized for a high-cycle spring sometimes need hardware upgraded at the same time. We give you a free estimate and quote it before any work starts, so you know the price going in. Call (844) 484-9800 for an exact quote.
We Also Serve Cities Near Sunset
We repair and replace garage door springs throughout the Sunset area and the surrounding communities, including Olympia Heights, Westwood Lakes, Kendall, and Richmond Heights. If you’re just outside Sunset’s bounds, call and we’ll confirm we cover your street. Our garage door spring repair team handles the same brand of builder-grade steel doors and wind-code requirements across these neighborhoods, and we’re glad to serve you in Sunset and nearby.
Serving Sunset, FL – Our Local Coverage Area
We serve Sunset and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Spring Repair in Sunset
A broken spring is rarely covered by homeowner’s insurance, even in hurricane season. Most policies treat spring wear and mechanical failure as maintenance, not storm damage, so it usually falls on you. If a storm causes the failure, check with your insurer before you file. When you’re ready to repair, call (844) 484-9800 for a free estimate.
A spring replacement by itself usually doesn’t require a new NOA or Florida Product Approval, but the surrounding hardware must match what the door was approved with. Because Sunset is in unincorporated Miami-Dade, inspectors can reject mismatched drums, tracks, or bracing at permit close-out. It’s worth asking the county building department what your particular job needs. We’ll tell you what we find and quote the repair before we start.
Yes, more often than not. A straining LiftMaster, Chamberlain, or Genie opener on a Sunset door is usually a sign the spring has lost tension or partially failed, so the opener is lifting weight it was never meant to carry. Left alone, the opener burns out and you’re paying for two repairs instead of one. Call (844) 484-9800 and we’ll check the spring and the opener together.
If your household opens and closes the door several times a day, a standard-cycle spring may wear out faster than you’d expect. High-cycle springs are rated for more open-close cycles. On the original builder-grade doors across Sunset, the spring that came with the house was often the lowest-cycle option. We’ll measure your use and recommend the right rating; the written estimate gives you the price.
Sometimes a spring repair plus track realignment fixes it; sometimes the panel and reinforcement damage means a new door. A door that jumps its track after a storm in Sunset often has binding panels and spring or reinforcement that were never matched to Miami-Dade wind-load requirements. We inspect the whole door and tell you honestly which way it goes. Call (844) 484-9800 for a free estimate.
When Your Door Won’t Move, We Move Fast
In a typical Sunset ranch, a homeowner hears that bang from the garage and finds a snapped torsion spring on a 16′ or 9′ builder-grade steel door, often with a rusted bottom panel and a straining LiftMaster or Chamberlain opener. The usual cause is a standard spring run past its rated cycles in salt-laden humidity, with corroded rollers and a misaligned track adding drag. What a qualified local pro does next is straightforward: measure door balance, replace the torsion spring with a correct-cycle unit, check drums, cables, and end bearing plates, realign the track, and confirm the door is level before testing the photo-eye sensors. That’s the work we do across Sunset.
Garage doors are all we do, and we do every part of them – springs, cables, tracks, rollers, openers, panels, and full new doors. If a door fails and waiting until Monday isn’t an option, our emergency service is available, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (844) 484-9800 for a free estimate. The price is quoted and agreed before any work starts.
Written by the team at Kendall Garage Door Repair Co.