Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Kendall?
Panel replacement in Kendall typically costs $250 – $500 for a single damaged section, and most homes land around the middle of that range once the panel, labor, and color match are counted. The final price depends on which panel failed, whether your door uses a standard 21-inch or a taller section, and whether the replacement panel still matches your existing run. We set the exact number in a free written estimate before any work starts.
If your door took a hit from a backed-in car, a storm, or just years of sun and humidity, a single panel swap is usually the cheapest way back to a working, good-looking door. Call (844) 484-9800. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Key Takeaways
- Typical panel replacement in Kendall: $250 – $500 per section, parts and labor included.
- One damaged panel is almost always cheaper to replace than a whole door, which runs $700 – $2200.
- Color and profile matching is the biggest wildcard on older doors – it decides whether a single panel is even possible.
- South Florida sun and summer storms are the two most common causes of panel damage we see around Kendall.
- We’re fluent in Clopay, Amarr, Wayne Dalton, Raynor, and the other major door brands, so we can often identify your panel from the door itself.
Panel Replacement Cost Breakdown (2026)
Here’s how a typical panel job breaks down in Kendall. These are estimated ranges for the work, not a final quote – the written estimate sets the price.
| Line Item | Typical Estimated Range |
|---|---|
| Single steel panel replacement (standard height) | $250 – $500 |
| Panel replacement on a taller or custom-profile section | Upper end of $250 – $500 |
| Two adjacent panels replaced together | Roughly double the single-panel range |
| Garage door repair (broader repair, if more than the panel is damaged) | $150 – $600 |
| Track realignment (if the panel damage came with a bent track) | $120 – $240 |
| Roller replacement (if worn rollers caused the jam) | $110 – $220 |
| Cable repair (if a cable also let go) | $130 – $250 |
| Full new door installation (when panels can’t be matched) | $700 – $2200 |
The range moves around based on four things: whether the panel is a stock profile or a discontinued one, whether the color still matches the rest of the door, how the panel is attached (some sections interlock, others use hinges and struts), and whether anything behind the panel was also damaged. A clean single-panel swap on a common Clopay or Amarr door sits near the low end. A weathered door where the new panel would look obviously different, or a door that’s out of production, tends to push toward the top of the range, or toward a full door if a match can’t be found.
One thing that surprises homeowners: panel damage rarely happens alone. A car impact often bends a track or pops a roller loose at the same time, and storm debris can do the same. When we write the estimate, we check the whole door – springs, cables, rollers, and tracks – so you’re not paying for two visits. Spring work is high-tension and genuinely dangerous, so if that comes up, we handle it as trained professionals rather than leaving it as a DIY project.
What Affects Panel Replacement Pricing in Kendall
Kendall homes are mostly concrete-block construction with attached garages facing the afternoon sun, and that shapes which panel problems come up and what they cost to fix. Here’s what we weigh when we price a job here.
- Brand and panel availability. A panel for a Clopay, Amarr, Wayne Dalton, Raynor, or LiftMaster-compatible door is usually a stock item. A discontinued profile may need a custom order, which can push the job to the top of the $250 – $500 range or beyond. We already know these systems before we knock on your door, so we can often tell you from the driveway whether a match exists.
- Color and finish matching. A brand-new panel next to panels that have spent ten summers in the Florida sun can look a shade off. Some homeowners accept the slight difference to save money; others replace the adjacent panel too. That choice is the single biggest swing in the estimate.
- Panel height and profile. Standard sections are cheaper; taller or decorative raised-panel and carriage-style sections cost more to source and to fit.
- Hidden damage. Dented panels often come with a bent bottom section, a misaligned track ($120 – $240 to realign), or a stretched cable ($130 – $250 to repair). We price those up front rather than surprising you later.
- Access and door type. A single-car door with a simple panel is a quick job. A double door, or one with glass or a custom top section, takes longer and more care.
- Whether the door is worth saving. If multiple panels are damaged or the door is showing structural wear, a full new door installation ($700 – $2200) can make more sense than piecemeal panel work.
If you’re weighing a single panel against more extensive work, our guide to panel replacement walks through when a section swap is the right call versus a whole-door replacement.
How to Save on Panel Replacement
Panel replacement is one of the more budget-friendly garage door jobs, but a few choices keep the cost at the low end of the range.
- Fix it early. A small dent is a single-panel job. Left alone, a bent panel can throw off the door’s balance, wear the rollers, and turn a simple swap into a broader repair ($150 – $600 range).
- Get a free written estimate first. Call (844) 484-9800 and we’ll give you a clear number before any work. No guesswork, no fee.
- Know your brand. If you can tell us the manufacturer – Clopay, Amarr, Wayne Dalton, Raynor, and so on – we can price the panel faster and more accurately. Check the sticker on the inside of the door if you’re not sure.
- Ask about matching versus replacing adjacent panels. Sometimes one panel does the job; sometimes two look better. Have both priced and choose.
- Bundle related fixes. If your rollers ($110 – $220) or opener ($120 – $320) are also on the fritz, doing it all in one visit saves a trip and often a little on labor.
We’re a single-trade shop – garage doors are all we do – so we’re not upselling you on unrelated home repairs. The right fix for your specific door, opener, and situation is the goal, and the estimate always reflects that.
When Is Panel Replacement the Right Call?
Panel replacement makes sense when one or two sections are damaged but the door frame, springs, and opener are sound. A backing-into-the-door dent, storm debris, or a single cracked section are the classic cases. In those situations a $250 – $500 panel job gets you a fully working door for far less than a new installation.
It’s time to consider a full door when two or more panels are damaged, the door is out of production with no matching profile, or the design feels dated and a new look is on the wish list. New door installation runs $700 – $2200 in Kendall, and we handle both repair and full installation, so you never need a second company as your needs change. If your opener is also aging, that’s a separate conversation – repairs run $120 – $320 and new opener installation $250 – $550, and we’re factory-familiar with LiftMaster, Chamberlain, Genie, and Craftsman systems.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Kendall?
Panel replacement in Kendall typically costs $250 – $500 for a single section, including parts and labor. Taller or custom-profile panels and jobs that require a color match to weathered panels push toward the top of that range. Call (844) 484-9800 for an exact quote – estimates are free.
Is it cheaper to repair a panel or replace the whole door?
Repairing a single panel ($250 – $500) is almost always cheaper than a full new door installation ($700 – $2200). Replacing the door only makes sense when multiple panels are damaged or no matching panel can be found. We’ll tell you honestly which one fits your door.
Can you match the color of my existing door?
Usually yes, especially on current Clopay, Amarr, Wayne Dalton, and Raynor doors where the original profile is still in production. On older or discontinued doors, a perfect match isn’t always possible, and we’ll show you the closest options before you decide. The estimate tells you which path is realistic.
How long does panel replacement take?
A single-panel swap is usually a short same-day job once the panel is on hand. Custom or custom-order sections take longer to source. Fast dispatch from 7am to 7pm, Sunday through Friday, helps get most standard jobs done quickly.
What causes garage door panel damage in Kendall?
Most panel damage we see around Kendall comes from backing into the door, storm debris during summer weather, and general wear from the strong afternoon sun. Catching a dent early keeps it a single-panel job instead of a broader repair. Call (844) 484-9800 to get it looked at.
Why Homeowners Around Kendall Call Us
We’re Kendall Garage Door Repair Co, and garage doors are all we do. We’re certified to service eight of the most widely installed residential door and opener brands, and we specialize in the safety-sensitive work – springs, cables, and the frame that holds it all together. When you call about a panel, you’re talking to someone who already knows your door’s brand and how it goes together.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is often possible for standard panel jobs, and every estimate is free and written. If your door is stuck open, closed, or off its track, we offer emergency garage door service so you’re not waiting until Monday. Our technicians have up to 10 years of experience, and they arrive knowing what to do.
Whether you’re near Kendall Town and Country, the Hammocks, or anywhere else in the Kendall area, we’ll give you a straight answer on cost, a clear plan, and doors that work again. Call (844) 484-9800 for your free estimate today. You can also learn more about Kendall Garage Door Repair Co and what we do.
Pricing reflects the Kendall market as of 2026. Kendall Garage Door Repair Co offers free estimates – call (844) 484-9800.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Travis Miller"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Tyrone Prince"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Salma Najjar