Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Kendall Homeowners
A garage door that no longer runs smoothly makes everything harder. Every trip in and out of the driveway depends on it, and when the panels are bent, the springs are tired, or the opener is older than the door, patching it costs more than replacing it. We handle garage door installation in Kendall for homeowners who want the door measured and fitted right the first time. Our technicians have up to 10 years of experience, and we’re factory-familiar with the brands already on most Kendall homes. We answer 24/7 for the phone line, and fast dispatch from 7am to 7pm gets an assessment moving. Call (844) 484-9800 for a free estimate.
What Our Garage Door Installation Service Includes
Every installation starts with measuring the opening, checking how the framing sits, and matching the door to your vehicles and daily use. We work through the full count of new doors here so you can see what fits your situation.
New Door Installation
A new door installation replaces the whole door and the hardware that carries it, not just the panels. You need it when the existing door has reached the end of its life, when repeated repairs keep landing on the same sections, or when you’re changing the style of the front of the house. We measure the opening in Kendall, check that the tracks and springs suited to the new door’s weight are part of the job, and set the door so it travels evenly from the first open.
Single Car Door
A single car door covers one bay and is the most common size in Kendall’s older residential streets. It’s the right call when one door fails and the other bay is still working fine, since there’s no reason to replace both. We fit single doors across the brands we service, and we check that the opener on that bay is rated for the weight of the new door rather than assuming the old one is.
Double Car Door
A double car door spans two bays in one opening and takes a heavier spring system than a single door to carry its weight. Homeowners ask for these when they’re replacing a wide door that has started to sag in the middle or struggle on the way up. We match the torsion setup to the door’s actual weight rather than the old door’s label, which is where a lot of wide doors go wrong.
Custom Garage Door
A custom garage door is built to a non-standard opening, a specific panel layout, or a look that has to match the house. You need one when the opening isn’t a stock size or when the front elevation calls for something the standard lines won’t give you. We measure carefully, talk through the options across manufacturers, and confirm the lead time so you know what you’re waiting on before anything is ordered.
Steel Doors
Steel doors are the workhorse choice for Kendall homes, and they hold up well to the south Florida humidity that wood fights against. They suit most installations unless the design calls for a natural timber look. We fit steel doors from Clopay, Amarr and Wayne Dalton and match the gauge and insulation level to how the space behind the door is used.
Wood Doors
A wood door gives a warmth and finish that steel can’t copy, and it’s the pick when the house’s architecture calls for it. Wood needs more attention over the years in this climate, so it suits homeowners who want the look and are ready to keep up with it. We fit wood doors and set the springs for their weight, which runs heavier than the equivalent steel door.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Installation
We work across the residential manufacturers installed throughout Kendall, which means you don’t have to track down a single-brand dealer to get the door or the opener you want. LiftMaster and Chamberlain openers show up on a large share of the homes here, and we know how their travel limits, force settings and smart-home pairing behave once a heavier or lighter door is hanging on them. We service Wayne Dalton doors and know where their panel joints and hardware tend to wear. Craftsman and Raynor equipment crosses our path often too, and the installation details differ enough between them that it pays to have seen the system before.
That familiarity matters most after the install, when the opener has to be re-taught the door’s travel and the springs have to carry the new weight without strain. We set up LiftMaster and Chamberlain systems so the app pairing and safety reverse work as they should, rather than leaving you to figure out the manual. Whether you have Wayne Dalton, Craftsman, Raynor or any other make, we can help.
Signs You Need Garage Door Installation Right Now
- Panels are bent or cracked. A dented or split panel weakens the door’s structure and can throw off how it tracks. Once several sections are damaged, replacement usually costs less than chasing the damage panel by panel.
- The door sags or binds in the opening. A door that catches on one side or bows in the middle is telling you the door or its hardware has given up. This puts strain on the opener and the springs with every cycle.
- Repeated repairs on the same door. When you’re calling for a fix every few months, the money adds up faster than a new door would. It’s the clearest signal that the door itself is the problem.
- The opener can’t lift the door anymore. If a correctly adjusted opener still struggles, the door has likely become too heavy for its springs or too worn to move cleanly. A new door with properly matched springs fixes the cause.
- You’re changing the front of the house. A remodel, a new paint scheme or a resale prep often means the old door no longer fits the look. Planning the installation around the project keeps the timing clean.
Our Garage Door Installation Process – Step by Step
- 1
Free measure and written estimate. We come out, measure the opening, check the framing and headroom, and look at the existing opener and spring setup. You get a written price for the door and the work before anything is ordered, and that written estimate sets the final price.
- 2
Choosing the door and hardware. We walk through the options across the manufacturers we service, from a stock single steel door to a custom build. The springs, tracks and rollers get matched to the door’s actual weight, which is the part most installations get wrong.
- 3
Ordering and scheduling. Once you’ve approved the door, we place the order and confirm the lead time with you. Installation is scheduled around that date so you’re not left guessing when the work happens.
- 4
Removal and installation. On the day, the old door and hardware come down and the new door goes up. The tracks are set level, the springs are tensioned by trained technicians, and the door is checked for smooth travel across the full opening.
- 5
Opener setup and final walkthrough. We re-set or install the opener, dial in the travel limits and force settings, and test the safety reverse. Then we open and close the door with you and confirm everything works before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Kendall?
A typical new door installation in Kendall runs $700 – $2,200 depending on the size of the door, the material, and how much hardware has to be replaced along with it. Steel doors sit toward the lower end of that range, while wood and custom builds sit higher because of the material and the fit work involved. If the opener also needs replacing, opener installation is estimated at $250 – $550.
What moves the price most is the door itself: a single car door costs less than a double, and a custom size or finish adds cost over a stock line. Insulation level, window inserts and the condition of the framing around the opening all play a part too. To avoid overpaying, get the estimate in writing with the door model and the hardware spelled out, and ask whether springs, tracks and rollers are included in the figure or added later. Our free estimate covers the measure, the door options and the hardware, and the written estimate sets the final price before any work starts.
If you’re weighing a new door against keeping the old one, our garage door repair service can tell you whether a fix is worth it.
Garage Door Installation Near Kendall – Our Service Area
We install doors across Kendall and the surrounding neighborhoods, including Richmond Heights, The Crossings, Pinecrest, Palmetto Estates, Three Lakes, Palmetto Bay, Kendale Lakes, The Hammocks, Kendall West, Sunset and Glenvar Heights. Measuring and scheduling are handled around your address, and the same written estimate applies wherever you are in the area. You can see our garage door installation work in Richmond Heights as one example of how the process runs.
Serving Kendall, FL – Our Local Coverage Area
We serve Kendall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Installation in Kendall
Garage door installation is the fitting of a complete new door, including the panels, tracks, springs, rollers and the opener setup that carries it. It replaces the whole door system rather than repairing one part, which is why the springs and hardware get matched to the new door’s weight. We handle the measure, the door choice and the fitting from start to finish.
Most single door installations are finished in a few hours once the door is on site, and a double door takes longer because of the heavier setup. The bigger factor is the order lead time for the door itself, which varies by manufacturer and whether it’s a stock or custom build. We confirm the timeline with you before the order goes in, and the written estimate sets the price.
A typical new door installation in Kendall runs $700 – $2,200, and opener installation runs $250 – $550 if you’re replacing that too. The range depends on door size, material and how much hardware is included. Call (844) 484-9800 for an exact quote, estimates are free.
Yes, we service Wayne Dalton doors and openers as part of our installation and repair work. We also cover LiftMaster, Chamberlain, Genie, Clopay, Amarr, Craftsman and Raynor equipment. Whether you have Wayne Dalton or any other make, we can help.
Installation is measured and scheduled rather than done on a walk-in basis, so a new door is booked around the order and the measure. We answer 24/7 for the phone line, and fast dispatch from 7am to 7pm runs Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Your installation carries a warranty on our workmanship, and the door and opener carry their manufacturers’ warranties. We explain both when we give you the written estimate so you know exactly what’s covered. Ask us to spell out the terms before the order goes in.
Clear the driveway and the area inside the garage so the technicians have room to work and to lay out the old door. Move anything stored along the walls near the tracks and take down anything hanging from the ceiling near the opener. You don’t need to do anything to the door itself, we handle the removal and installation.
Schedule Your Garage Door Installation Service in Kendall Today
If your door is worn out, damaged or just past saving, a new one measured and fitted right makes the whole driveway easier. Call (844) 484-9800 for a free, no-obligation estimate on garage door installation in Kendall. We answer 24/7 for the phone line, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a written price before any work starts. If an urgent problem can’t wait, our emergency garage door service and garage door spring repair can help in the meantime.
Written by the team at Kendall Garage Door Repair Co.