Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Sunset?
Garage door work in Sunset typically costs between $150 and $600, and most jobs land in that range. A straightforward repair like a cable or a set of rollers sits at the low end, while opener replacement or a multi-part fix pushes toward the top. New door installation is a separate project, usually $700 to $2,200 depending on door size, material, and insulation. Every price we give you is a written estimate, and that estimate is the price.
We’re Kendall Garage Door Repair Co, and garage doors are all we do. Our technicians have up to 10 years of experience and arrive already familiar with the eight major brands we service: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That means fewer surprises when we open up your door and fewer return visits after we leave.
Garage Door Cost Breakdown (2026)
Here’s what the common jobs in Sunset run in 2026. These are typical estimated ranges, not quotes. The written estimate after we look at your door sets the final price.
| Service | Typical Estimated Cost |
|---|---|
| Garage Door Repair (general) | $150 – $600 |
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2,200 |
One note on springs: the $180 – $340 range covers a single spring. Doors almost always run a matched pair, and when one fails the other is usually close behind, so a pair is typically replaced together. Expect a pair to come in around twice that range. It’s not a sales push – running a new spring against a worn partner just means you’ll be calling again within the year.
What moves a job toward the top of a range: rusted or snapped hardware that has to be cut out, a door that’s been off its track long enough to bend the panels, opener boards that need replacing rather than resetting, and panel sizes that have to be ordered. What keeps it at the bottom: one worn part, a clean adjustment, or a door that only needs new rollers. A broken torsion spring is not a do-it-yourself project. Those springs hold serious tension, and the wrong move can cause a bad injury. We’d rather you call.
What Affects Garage Door Pricing in Sunset
Two doors with the same symptom don’t always cost the same to fix. Here’s what pushes the estimate around in Sunset specifically.
- Door age and hardware condition. Sunset homes range from newer builds to properties that have had the same door since they were finished. An older door with original hinges and rollers takes more time to work on than one that’s been kept up, and time is part of the estimate.
- Brand and parts availability. A Clopay or Amarr panel that’s still in production is a quick order. A discontinued Wayne Dalton or Raynor panel may mean a compatible match or a partial replacement. Because we service all eight brands, we know what’s orderable and what isn’t before we quote you.
- Opener type. A legacy Craftsman or Genie unit is a known quantity. A LiftMaster or Chamberlain smart opener with app integration takes a different diagnostic path, and if the board is the problem, the part cost changes the range.
- How long the problem has been there. A door that’s been dragging for a season usually needs more than a door that failed yesterday. Small misalignments left alone wear the tracks and the panels around them, so the fix grows.
- Door size and weight. Single-car doors sit at the low end of the installation range. Double doors, insulated doors, and carriage-style doors with extra hardware land near the top.
- Whether it’s a repair or a replacement. Sometimes the honest answer is that a $300 repair on a door already on its last set of panels costs more over the next few years than a replacement. We’ll tell you that when it’s true, and we’ll tell you when it isn’t.
Can You Fix My Garage Door the Same Day?
Yes, in most cases. Same-day service is available, and the common jobs – springs, cables, rollers, track realignment, opener repairs – are usually finished in a single visit. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If your door is stuck open, stuck closed, or hanging off its track, call (844) 484-9800 and we’ll get it on the schedule.
The things that push a job to a second visit are parts, not labor. A panel that has to be ordered, a discontinued opener board, or a door measured for a full replacement all take time to source. For those, we’ll give you the timeline up front rather than leave you guessing.
Repair or Replace: Which Costs Less in Sunset?
Repair is cheaper up front almost every time. The question is whether it stays cheaper over the next few years. As a general guide:
- Repair when the door’s structure is sound and one or two parts have failed. A spring, a cable, a roller set, or a track out of alignment is a repair.
- Replace when panels are rusted through, the door has been bent off-track more than once, or the hardware is at the end of its life across the board. Patching one failure on a door like that usually leads to the next one within months.
- Replace when the opener is failing and the door is already older. A new opener on a worn door is money spent on half a system.
We won’t push a replacement you don’t need. If a $180 – $340 spring repair gets you another several years, that’s the answer, and we’ll say so.
Do I Need a Permit for a New Garage Door in Sunset?
It varies by city and by job, so ask the City of Sunset building department before a full door replacement. Repair work generally doesn’t require one, but a new door or a change to the opening might. It’s a five-minute call that saves a headache later, and a licensed local professional will know the local requirement. We can point you in the right direction when we’re out for the estimate.
How to Save on Garage Door Repair in Sunset
There’s no magic discount, but there are real ways to keep the number down.
- Call at the first symptom. A door that’s getting loud, slow, or uneven is cheaper to fix than one that’s stopped. Catching a worn roller before it chews the track is the difference between a $110 – $220 roller job and a track and panel repair.
- Fix the opener before it strands the door. A remote that only works up close or a motor that strains on the way up is an early sign. Opener repair runs $120 – $320, well under replacing the unit and resetting your smart-home connections.
- Ask us to check the whole system at the estimate. If we’re already there for a spring, we’ll look at the cables, rollers, and opener at the same time. Catching a second worn part during one visit is cheaper than booking a second visit later.
- Get the written estimate before any work starts. Ours are free and itemized. You’ll see the part cost and the labor separately, so you can decide what to do now and what can wait.
- Keep the tracks clean and the hardware snug. No tools needed. Wiping the tracks and listening for new rattles catches small problems early.
Call (844) 484-9800 for a free estimate. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
What’s Included in the Estimate?
Every estimate we write for a Sunset job covers the parts, the labor, and the specific model numbers where they matter. You’ll know what brand of spring, which opener board, and which panel is going on your door before we start. If we open the door and find something the estimate didn’t cover, we stop and talk to you before doing anything that changes the price. No surprise line items after the fact.
Spring work is the one place we’re strict about this. A torsion spring replacement has to match the door’s weight and cycle rating exactly. A spring that’s close enough will fail early or leave the door unbalanced. We measure before we order, and we explain what we’re putting in and why.
Why Homeowners in Sunset Call Us
Sunset homeowners depend on their garage door every day – for the car, for security, for getting out the door on time. When it stops working, the priority is a technician who already knows the system. That’s the whole reason we stay focused on one trade.
- We work on all eight major brands. LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. We already know your system before we knock on your door.
- Spring repair is a specialty, not a side job. High-tension springs are the most dangerous part of a garage door. Our technicians are trained for it, and we don’t cut corners on safety.
- Full lifecycle. Same-day repairs, opener diagnostics, and complete new door installation. You won’t need a second company as your needs change.
- Emergency service is available. A door stuck open overnight is a security problem. A door stuck closed means the car isn’t moving. We treat both as urgent.
Our technicians have up to 10 years of experience across repairs, openers, springs, and installations. The local pro we connect you with is licensed and insured as their state requires. Every job is priced per the written estimate, and estimates are free.
FAQs – Garage Door Cost in Sunset
How much does garage door repair cost in Sunset?
Garage door repair in Sunset typically runs $150 – $600, with most single-issue jobs landing under $350. Springs, cables, rollers, and track realignment are the common repairs, and each has its own range. The written estimate sets the final price. Call (844) 484-9800 for an exact quote – estimates are free.
How much does spring replacement cost in Sunset?
Spring replacement in Sunset runs $180 – $340 for one spring. Because doors run a matched pair and both springs wear at the same rate, a pair is usually replaced together and costs about twice that range. We measure the door’s weight before ordering, so the spring matches the door rather than coming close. Call (844) 484-9800 for a free estimate.
Is it cheaper to repair or replace a garage door in Sunset?
Repair is cheaper up front in nearly every case, and it’s the right call when the door’s structure is sound. Replacement makes more sense when panels are rusted through, the door has come off-track more than once, or the hardware is failing across the board. A new door installation runs $700 – $2,200. Call (844) 484-9800 and we’ll tell you which one fits your door.
How much does a new garage door opener cost installed in Sunset?
Opener installation in Sunset typically costs $250 – $550, and opener repair runs $120 – $320. If your current unit is a LiftMaster or Chamberlain smart opener, a repair is often the better value than a full swap that resets your app and wall controls. We’ll diagnose before we recommend. Call (844) 484-9800 for a free estimate.
Can you come today if my door is stuck?
Yes, same-day service is available for stuck, off-track, or non-moving doors in Sunset. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. If your call lands outside dispatch hours, we’ll book it into the next opening. Call (844) 484-9800.
Call for a Free Estimate
If your door is making a noise it didn’t make last month, or it’s stopped moving entirely, the fastest way to a real number is a call. We’ll ask a few questions, give you a ballpark from the ranges above, and set a time for a free written estimate. Call (844) 484-9800. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Garage doors are all we do – and we do every part of them, from the spring to the opener to the panel. When we walk up to your door, we already know your system.
Pricing reflects the Sunset market as of 2026. Kendall Garage Door Repair Co offers free estimates – call (844) 484-9800.
Written by the team at Kendall Garage Door Repair Co.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Travis Miller"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Tyrone Prince"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Salma Najjar